Bucket Elevator

Bucket Elevator

Product Introduction The machine is mainly applied for vertical elevating of power or granule materials. Multi buckets are installed on a circulation chain or belt. When working, the materials will be loaded into bucket from the bottom and then discharged when bucket moves to top. The buckets work continuously in circulation in a closed shell to realize continuous materials elevating. The machine is characterized in large elevating capacity, low energy consumption, low noise, and good seal performance, no dust leakage, safe and reliable.

Products advantages

High efficiency

Driving power is small. Use in flow type feeding, induction type discharging, hoppers with large loading capacity are intensively layout. So it has high energy efficiency because it is almost no materials go back.

Wide application range

Wide application range. This kind of elevator does not have many requirement of materials variety, materials property etc. it not only can elevate material like general powders, granules, it is also can elevate material with strong weariness. It has sealing and less environmental pollution.

Stable operation, low failure rate

Good reliability, advance design principle and processing method ensure the reliability of the machine running. It runs stably so it is also suitable for lifting materials to higher places.

Long service life

Service life is long. The elevator feeding way is inflow type and no need to get the materials with the bucket. Little extrusion and collision among the parts. The machine is designed to ensure that material during feeding and discharging will be scattered little, with reduce the mechanical wear.

Working principal

The recycling bucket of bucket elevator scoops the materials up from the storage bin, elevator to the top with the conveyor belt or chain, flips down after bypass top wheel, and poured material into the receiving groove. Belt drive of bucket elevator is installed at top and down transmission drum or the top and down idler drum. Chain driving is installed on the bucket elevator, at the top and down, there is pair of drive sprocket. At down and top, there is a pair of idler sprocket. Normally the bucket elevator is with shell to prevent the dust inside the bucket and also dust generated during delivery.